Question: How long does it take to cook a 12 lb bone in ham?

A 12-pound ham will take about 18 to 20 minutes per pound to bake, or roughly three and one-half to four hours. At the lowest time estimate, begin checking the internal temperature. When it reaches 160 degrees F, the ham is done.

How long do you cook a 12 pound ham and at what temperature?

Preheat the oven to 325°F. To heat the ham, place it on a rack in a shallow roasting pan, and bake uncovered. For a whole ham, allow 15 to 18 minutes to the pound; for a half, 18 to 24 minutes per pound.

Do you cook a ham at 325 or 350?

A raw, or fresh, ham needs to be fully cooked. … Cover with foil and cook in a 350 F oven for approximately 20 minutes per pound, or until the internal temperature is 160 F. Baste throughout cooking.

IT IS INTERESTING:  Question: What is healthier baked or grilled chicken?

How long does it take to cook a bone in ham?

Uncooked and Bone-In Ham

Cooking Temperature and Time: A half ham weighting between 5 and 7 pounds requires 22 to 25 minutes of roasting at 325°F per pound. For whole bone in hams weighing between 10 and 14 pounds, cook the ham at 325°F for 18 to 20 minutes per pound.

How long does a 11.5 pound ham take to cook?

Put the ham, flat-side down, on a rack in a roasting pan. Pour 1/4 inch water into the bottom of the pan. Transfer to the oven and roast until a thermometer inserted into the thickest part of the ham registers 130 degrees F, about 2 hours, 30 minutes (about 15 minutes per pound).

How long does it take to cook a ham at 350 degrees?

If you’re starting with a fully cooked city ham, bake it in a 350 degree F oven for about 10 minutes per pound. If your ham is only partially cooked, bake it for 20 minutes per pound. To help keep your ham moist and juicy, place the ham cut-side down in a baking pan and tent it with foil.

What temperature should a bone in ham be cooked to?

Cook-before-eating hams or fresh hams must reach 145 °F (with a 3-minute rest time) to be safely cooked before serving. Cook in an oven set no lower than 325 °F. Hams can also be safely cooked in a microwave oven, other countertop appliances, and on the stove.

Should you cover ham in the oven?

3. Baking the ham uncovered. Ham is best reheated low and slow, and heating it uncovered means that the moisture in the ham evaporates, leaving it dry and unappetizing. … Cover the ham with foil or use a baking bag to heat up the ham until it’s time to glaze.

IT IS INTERESTING:  Best answer: Can I use a food processor to make cakes?

How long do I cook a precooked ham for?

A precooked ham should be cooked in the oven at 325 degrees for 10 minutes per pound, or until it reaches 145 degrees, according to the USDA. If you’re reheating a ham that was repackaged or leftover, it needs to be cooked to 165 degrees F.

How do you cook a ham that is not precooked?

To avoid drying out ham, cook slowly at 325ºF. Allow 20 to 30 minutes per pound for ham that has not been precooked (follow directions on label for precooked hams). Begin roasting ham by placing fat side up, the melting fat will baste your ham.

Where should you take the temperature of a baked ham?

The ham is taken away from the heat source and the instant read thermometer is immediately inserted into the thickest part of the ham and it will give a temperature reading in approximately 15 seconds.

How do you cook a raw ham on the bone NZ?

Rinse the ham under cold water and place in a large stockpot. Cover with fresh cold water and add the vegetables and peppercorns, plus the herbs. Bring the water to the boil, then reduce the heat, cover partially with a lid and simmer very gently for 4-6 hours.

Do you cook ham bone up or down?

Preheat oven to 275˚F. Remove all packaging materials and place ham in a shallow roasting pan. Quarter and half hams should be cooked flat/face-side down. Whole hams should be cooked fat-side up.

How do I know when my ham is done?

How do you know if a ham is done? A ham is ready to heat when a thermometer inserted into the thickest part of the ham registers 145 degrees F. Your thermometer should not be touching any bone, as this will produce an inaccurate reading.

IT IS INTERESTING:  Can you use baking soda and vinegar on cast iron?
I'm cooking