In a high-sided saucepan over medium-high heat, bring cold water and sugar to a boil. Turn the heat to low and stir constantly until the sugar dissolves completely and the mixture is clear, approximately 3 to 5 minutes. Remember – the longer you boil it, the thicker the syrup will be when cooled.
How long does it take to boil maple syrup?
After it is filtered, we fire it up and return to boiling it. Depending on how far we’ve already taken it down, it takes us anywhere from 15-45 minutes to finish it.
How do you know when boiling syrup is done?
In professional maple syrup production, the maple syrup maker will boil anywhere from about five gallons to 13 gallons of sap down to about a quart of maple syrup. When the syrup reaches 7 degrees Fahrenheit over the boiling point of water (212 degrees F), or 219 degrees F, the syrup should be done.
How do you boil syrup?
You simply boil the sap until enough water is removed and you are left with pure maple syrup. This process generates a lot of steam so it may be worth doing it outside if you can because your kitchen can quickly fill with steam. Light your stove or turn it on and let your sap boil away.
How long does it take to boil down 1 gallon of maple syrup?
It takes about 1 hour per gallon to evaporate maple sap into syrup. For example, it would take 10 hours of boiling to reduce 10 gallons of sap down to 40 oz of maple syrup.
How long do I boil sap?
Boil concentrated sap in kitchen until it reaches a temperature of 7 degrees over the boiling point of water (varies with elevation). Skim off foam, if necessary. Pour into sterilized canning jars, leaving appropriate head space, and cover with sterilized lids and rings. Process in boiling water bath for 10 minutes.
How long does it take to boil 3 gallons of sap?
Kick back put your feet up and make some awesome syrup. You will need about 60 gallons of your sap to make a gallon of syrup. At a boiling rate of 3 gallons per hour your looking at about 12 hours of boiling.
Should you Stir sugar syrup?
Again, too low and it takes forever; too high and it cooks too quickly. Combine your sugar and water off the heat, and stir it just until the sugar is evenly moistened. Avoid stirring the sugar if at all possible once you put it on the stove. Agitation can cause the sugar to crystallize.
What temperature does sap boil at?
The sap should be at a boiling temperature around 217°F to 218°F. Transfer the concentrated sap to a smaller boiling pan or pot and complete the finishing process on a controlled heat source such as a gas burner, camp stove or kitchen range.
Why is my maple syrup foaming?
As the sap boils, pure water evaporates and the sucrose concentrates. During the boiling, foam must be skimmed from the surface every few minutes. The foam is the product of a chemical reaction that occurs as the sap heats. The cooking also causes minerals in the sap to precipitate as solids.
Is Grade B maple syrup better than grade A?
Maple syrup that is very sweet is therefore more popular and therefore gets the grade “A” rating while the darker, stronger and more flavorful varieties (which are not as sweet) are considered second best and are called grade “B”.
How long can maple syrup last?
Maple syrup unopened will last indefinitely. All of our syrup is heat packed and sealed so until it is cracked open it will have an indefinite shelf life. Once the jug is opened it should be kept in the refrigerator and should last up to 2 years.
Can I stop boiling sap and start again?
If you leave it full once you start to boil again and are ready to start allowing new sap to come in I normally will draw off a a couple of coffee pots full of hot sap and pour it into the starting point of the second channel.