A: Congratulations on the new grill! Yes we suggest preheating the grill for 20 minutes before the first use. This should burn off any packing material or oil. Then throw your food on the grill and you are good to go.
How long should you let a new grill burn off?
Clean away dust, oil, adhesives, coatings, and other gunk that may have accumulated on your BBQ grill at the factory or the store by burning it for 20 to 30 minutes before the first use.
What is the first thing to do with a new grill?
Preheat and Clean the Grill
- Turn all burners to maximum heat, then close the lid.
- Wait 10 to 15 minutes or until your grill reaches 400 F, then reduce the burner settings to medium heat. …
- Open the lid when the grill reaches temperature, then use your stainless steel brush to clean all debris from the cooking grates.
Do you have to do anything to a new grill?
Do a Leak Test
You should do this not only for a new grill, but as part of regular gas grill maintenance. If you suspect a leak, find the cause, correct it, and then clean and inspect the grill’s valve, hose and regulator before you start grilling again.
Do you have to burn off a new charcoal grill?
Your new grill comes with oils and contaminants from the factory it was made in that when burned, produce nasty smoke and taint the taste of any food you cook. Seasoning is all about burning this off before it gets on your food.
How do you prepare a brand new grill?
Two Easy Steps to Seasoning Your Grill
- Before turning the grill on, coat the surface of the grate with high-heat cooking oil. …
- Wipe any excess oil off the grate with a paper towel, then turn the grill on high for about 15-20 minutes or until the oil starts to burn or smoke. …
- Tip: After each use, let grill your grill cool.
How do you use a new grill?
Season your grill
Before you use your grill for the first time, spray the grates evenly with a high-heat cooking spray like canola oil while the grates are cold. Then, turn the grill on to medium heat for about 15 minutes until the oil burns off or starts to smoke. That’s it.
How do I break in my new Weber grill?
A: Congratulations on the new grill! Yes we suggest preheating the grill for 20 minutes before the first use. This should burn off any packing material or oil. Then throw your food on the grill and you are good to go.
What can I do with a brand new charcoal grill?
Seasoning a charcoal grill might need a burning time up to two hours. Therefore, make sure you are using a vegetable oil that is highly heat resistant and have a higher smoke point. Apply the oil to the grates and as well as to the lid, emitters, and pits if the grill is new.
How do you use a new charcoal grill?
Lay your meat on the grill, then close the lid, making sure the bottom vents are still open and top vents are closed. Keep the heat even while cooking by slightly opening or closing the top vents as needed. Let the meat cook for a few minutes, then lift the lid and flip one piece with your tongs or spatula.
Do you need to season a new Weber charcoal grill?
Our grates do not require any seasoning or re-seasoning prior to use. The grates have a porcelain enamel coating on them that takes away the need for seasoning. Before using grates for the first time, we just recommend preheating the grill and brushing the grates with a bristle brush and you are good to go.