How do you manually light a gas grill?
Natural Gas Grills
Turn the gas supply valve on. Put the match in the match stick holder and strike the match to light it. Then insert the match holder with the lit match down through the cooking grates, past the flavorizer bars and adjacent to the left burner. Ignite the burners individually going from left to right.
How do I light my Weber grill if ignitor is broken?
Turn on the gas supply to the grill. Put a match in the match holder and light the match. Insert the match holder, with lit match, down through the cooking grates, past the Flavorizer Bars and adjacent to the left burner (pictured below). Push the left control in and turn it to START/HI to igniter the left burner.
Why is my propane grill not lighting?
It could be a worn-out spark module, a loose wire or other connection, a dead battery, corrosion or dirt on the igniter tip, or cracked porcelain on the igniter element. If the grill doesn’t light using the match, check for low or no gas flow. … When they open the tank, the valve interprets the outrush of gas as a leak.
Why is my igniter not working?
Make sure that the igniter is making a clicking noise when you press the igniter button. If it doesn’t click, then the wires may not be connected properly, the battery may be dead or installed incorrectly, or the igniter module may have failed.
How do I get my Weber grill out of bypass mode?
If you think your grill is in bypass mode, you can reset the regulator by following these steps:
- Turn off all the burners and close the tank valve.
- Wait 60 seconds.
- Open the tank valve fully and wait a few seconds for pressure in the regulator and gas hose to equalize.
How do you light the pilot on a flat top grill?
To ignite, push and turn the IGNITION BURNER knob to MAX. Push and hold ELECTRONIC IGNITION button until the IGNITION BURNER lights. If ignition does NOT occur in 5 seconds, turn the burner controls OFF, wait 5 minutes and repeat the lighting procedure.